| 4XCNCJC |
| 4XCNCJC |
 | |  | |  | |  | |  | |  |
| 4XCNCJC Product Description |
Have you ever wanted to machine a part quickly without having to make G-Code? If so, this is the solution!
This board will do just that. Flip the jog enable switch ( sold separately ) and the jog control board assumes
control of your 4XCNC10B, 4XCNC15B, 4XCNC10C, 4XCNC15C, or a DB25RBOB with the single axis bipolar
or unipolar drive boards. If you make your own interface cable, you can use this board with any step direction
drive controller you choose. This allows you to jog your machine without your computer. No more metal
shavings in your computer keyboard. The 4XCNCJC also does incremental stepping with 15 different
incremental step distances.
Simply unplug your existing 4 axis drive board and plug the computer cable into the 4XCNCJC board, and
then plug the 4XCNCJC board into the drive board. The boards themselves will plug directly into one
another or you can use a cable to do this if there is not enough room in your cabinet for both boards.
You hook up 5 volt power, A standard SPST switch ( sold separately )for Jog enable, 4 Standard momentary
SPDT toggle switches ( sold separately ) to control the axises, a 50k ohm pot ( sold separately ), and the
supplied hex encoder, and you are ready to make chips!
This board will do just that. Flip the jog enable switch ( sold separately ) and the jog control board assumes
control of your 4XCNC10B, 4XCNC15B, 4XCNC10C, 4XCNC15C, or a DB25RBOB with the single axis bipolar
or unipolar drive boards. If you make your own interface cable, you can use this board with any step direction
drive controller you choose. This allows you to jog your machine without your computer. No more metal
shavings in your computer keyboard. The 4XCNCJC also does incremental stepping with 15 different
incremental step distances.
Simply unplug your existing 4 axis drive board and plug the computer cable into the 4XCNCJC board, and
then plug the 4XCNCJC board into the drive board. The boards themselves will plug directly into one
another or you can use a cable to do this if there is not enough room in your cabinet for both boards.
You hook up 5 volt power, A standard SPST switch ( sold separately )for Jog enable, 4 Standard momentary
SPDT toggle switches ( sold separately ) to control the axises, a 50k ohm pot ( sold separately ), and the
supplied hex encoder, and you are ready to make chips!
$115.00 (Includes shipping
anywhere in USA)
$125.00 (Includes
international shipping)
anywhere in USA)
$125.00 (Includes
international shipping)
| USA Buy Now Button |
| International Buy Now Button |
